173
Toshiba Utilities
Fingerprint Authentication Utility
5.375 x 8.375 ver 2.3
Fingerprint Logon
The fingerprint utility enables logon to your computer using
fingerprints. During user enrollment, fingerprint samples are
saved and associated with your Windows
®
user account.
When you attempt to log on again, your fingerprint is read
and compared with your enrolled fingerprints; if the
fingerprint is recognized, your logon is completed.
The Fast User Switching feature of Windows
®
XP is also
supported. If user A is logged on and the fingerprint utility
verifies the fingerprint of user B (who is already enrolled),
the utility recognizes the fingerprint and switches users.
If your system supports power-on security, existing
fingerprint samples can also be used for power-on
authentication.
The Power-on Security
The Power-on security feature prevents unauthorized access
to your computer when it is turned off by requiring the user to
pass fingerprint authentication. If fingerprint authentication
fails, the user will not be able to start the computer.
When power-on security is enabled, the system asks you to
authenticate your fingerprint. You have 40 seconds to swipe
your fingerprint.
If the authentication fails, the system tries again up to two
more times. If authentication fails after the third attempt, the
system shuts down.
Enabling Power-on Security
Power-on security is enabled automatically after the first user
fingerprints are enrolled.
To disable/enable power-on security:
1
Open the
Control Center
and go to
Settings - Power-on
Security
. (This wizard is displayed only if your system
supports power-on security.)
