background image

User’s Manual

8-11

Troubleshooting

Memory Cards: SD/SDHC/SDXC Card, Memory Stick/Memory Stick 
PRO, MultiMediaCard

For further information, please refer to Chapter 3, 

Hardware, Utilities and 

Options

.

Check the type of CD/DVD/BD you are using. 

The drive supports:
BD-Writer/BD-Combo:BD-ROM, BD-ROM DL, 

BD-R, BD-R DL, BD-RE, BD-RE 

DL

DVD-ROM:

DVD-ROM, DVD-Video, DVD-R, 

DVD-RW, DVD+R, DVD+RW, 

DVD-RAM

Recordable disc: CD-R, CD-RW, DVD-R, DVD-R 

DL, DVD-RW, DVD+R, DVD+R DL, 

DVD+RW, DVD-RAM, BD-R, BD-R 

DL, BD-RE, BD-RE DL

Check the region code on the disc. It must match 

that on the BD drive. Region codes are listed in 

the 

Optical disc drives

 section in Chapter 2, The 

Grand Tour.

Cannot write correctly

If you have trouble in writing, make sure you 

have taken the following precautions:
Use only media recommended by TOSHIBA.
Do not use the mouse or keyboard while writing.
Use only the software supplied with the computer 

for recording.
Do not run or start other software while writing.
Do not jar the computer while writing.
Do not connect/disconnect external devices or 

install/remove internal cards while writing. If 

problems persist, contact your dealer.

Problem

Procedure

Memory Card error 

occurs

Remove the Memory Card from the computer 

and then reinsert it in order to ensure it is firmly 

connected.
If the problem persists, then you should refer to 

the documentation supplied with your Memory 

Card for further information.

You cannot write to an 

Memory Card

Remove the Memory Card from the computer 

and check to ensure that it is not write protected.

Содержание Satellite L640







































































































































































































Отзывы: