Additional memory module is a precision electronic component that
may be fatally damaged by static electricity. Since the human body
can carry static electricity, it is important that you discharge yourself
before touching or installing any additional memory modules. To
discharge your body’s static electricity, simply touch any metal close to
you with bare hands.
Use a point size 0 Phillips screwdriver to remove and fasten the screws -
the use of an incorrect screwdriver can damage the screw heads.
Installing a memory module
To install a memory module, follow the steps as detailed below:
1.
Click
Power
in the
Settings
charm, and then select
Restart
.
2.
Hold down the
F2
key and then release this key one second after the
computer is power on - the BIOS setup utility will load.
In the BIOS setup screen, select
Exit -> Disable Build-in Battery,
and Power Off
.
3.
Remove the AC adaptor and all cables and peripherals connected to
the computer.
4.
Close the display panel and turn the computer upside down.
5.
Loosen the screw securing the memory module cover in place -
please note that the screw is attached to the cover in order to prevent
it from being lost.
6.
Slide your fingernail or a thin object under the cover and lift it off.
Figure 4-6 Removing the memory module cover
2
1
1. Screw
2. Memory module cover
Product appearance depends on the model you purchased.
User's Manual
4-27
