Toshiba Satellite C40-B Series Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 128

background image

The application allows you to choose from a variety of different media
onto which the recovery image can be copied including disc media
and USB Flash Memory.

Some of the disc media might not be compatible with the optical disc
drive connected to your computer. You should therefore verify that the
optical disc drive supports the blank media you have chosen before
proceeding.
USB Flash Memory will be formatted and all the data in the USB Flash
Memory will be lost when proceeding.

2.

Turn on your computer and allow it to load the Windows operating
system from the Hard Disk Drive as normal.

3.

Insert the first blank disc into the optical disc drive tray, or insert the
USB Flash Memory into one available USB port.

4.

Click

Recovery Media Creator

under

TOSHIBA

group in the Apps

view.

5.

After Recovery Media Creator starts, select the type of media and the
title you wish to copy, and then click the

Create

button.

Restoring the pre-installed software from your created

Recovery Media

If the pre-installed files are damaged, you are able to use the Recovery
Media you have created to restore the computer to the state it was in when
you originally received it. To perform this restoration, do the following:

When you reinstall the Windows operating system, the hard disk will
be reformatted and all data will be lost.
Please make sure to use the default Boot Mode option in the BIOS
setup utility before restoring.

1. Click the power icon ( ) on the Start screen and then select
Restart.
2. Hold down the F2 key and then release this key one second after
the computer is power on. The BIOS setup utility will load.
3. In the BIOS setup screen, select Advanced -> System
Configuration -> Boot Mode.
Note: Please skip the following contents if you cannot find the Boot
Mode option in your system.
4. Select UEFI Boot (Default).
If you set the Boot Mode as CSM Boot, the recovery media created by
Recovery Media Creator will NOT be able to restore.
If you create a recovery image using advanced recovery tools from
Control Panel, also make sure to use the default Boot Mode option
(UEFI Boot) in the BIOS setup utility before restoring.

User's Manual

5-14

«
...
84
85
86
87
88
...
»

Содержание Satellite C40-B Series

































































































































Отзывы:

Нет отзывов

Похожие инструкции для Satellite C40-B Series

Бренд: Panasonic Страницы: 80

Бренд: ASI Страницы: 18

Бренд: Packard Bell Страницы: 90

Бренд: Acer Страницы: 92

Бренд: Dell Страницы: 88

5110 Color Laser

Бренд: Dell Страницы: 90

Бренд: Dell Страницы: 71

Бренд: Toshiba Страницы: 2

Бренд: Toshiba Страницы: 4

Бренд: Texas Instruments Страницы: 85

Qosmio G30 G30-153

Бренд: Toshiba Страницы: 2

Qosmio M0026290

Бренд: Toshiba Страницы: 2

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 5

Бренд: Toshiba Страницы: 5

Бренд: Toshiba Страницы: 5

Qosmio X870 Series

Бренд: Toshiba Страницы: 164

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды