69
Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 3.1
7
Holding the memory module by its edges so that the gold
connector bar faces the slot, fit the module into the
socket.
8
Gently put the memory module connector down at an
angle and press down until the clips snap into place.
Do not force the module into position. The memory
module should be level when secured in place.
Inserting the memory module
9
Replace the expansion memory slot cover.
10
Replace the screws and tighten them.
11
Turn the computer over and reconnect any cables you
removed.
12
Turn on the computer.
To verify that the computer correctly recognizes the
memory, click
Start
,
Control Panel
and click
Performance and Maintenance
. Click
System
to view
the recognized memory.
13
If the computer does not recognize the memory, shut
down the computer, remove the memory slot cover, and
make sure the memory module is seated properly, as
described in step 8.
