Service Mode
INITIALIZATION OF MEMORY DATA
After replacing Main board, the following initialization is required.
1. Enter Service Mode.
2. Select "SET-ID" by pressing CHANNEL
or CHANNEL
button during display of
adjustment menu in Service Mode.
3. Change the data to Model ID of the TV set by pressing VOLUME
+ or
-.
4. While holding RECALL button on Remote Control, press CHANNEL
button on the TV.
The TV goes to standby mode.
5. Turn on power of the TV, then the initialization is completed.
6. Enter Service Mode and select Version Check Mode. Confirm if the model name and
MODEL ID is correct. If not, repeat from 1. again.
Note:
If wrong MODEL ID was set, abnormal display might appear.
ADJUSTMENT
