45
Chapter 6: Using the TV’s features
Tuning to a specific channel
(programmed or unprogrammed)
Tuning analog channels:
Press the Channel Number (0–9) on the remote control.
For example, to select channel 125, press 1, 2, 5, then
T
.
Tuning digital channels:
Enter the major Channel Number (0–9) on the remote
control, followed by the dash (
=
) button and then the
sub-channel number. For example, to select digital
channel 125-1, press 1, 2, 5, –, 1, then
T
.
Switching between two channels
using Channel Return
The Channel Return feature allows you to switch
between two channels without entering an actual
channel number each time.
1
Select the first channel you want to view.
2
Select a second channel using the Channel Number
buttons (and the dash (
=
) button if needed).
3
Press
R
on the remote control. The previous
channel will display. Each time you press
R
, the
TV will switch back and forth between the last two
channels that were tuned.
Note:
If you press
R
from a non-antenna input, the
TV will return to the last-viewed input.
Switching between two channels
using SurfLock
™
The SurfLock
™
feature temporarily “memorizes” one
channel to the
R
button, so you can return to that
channel quickly from any other channel by pressing
R
. To memorize a channel to the
R
button:
1
Tune the TV to the channel you want to program
into the
R
button.
2
Press and hold
R
for about 2 seconds until the
message “Memorized” appears on-screen. The
channel has been programmed to the
R
button.
3
You can then change channels repeatedly, and
when you press
R
, the memorized channel will be
tuned.
The TV will return to the memorized channel one time
only. Once you press
R
and then change channels
again, the CH RTN memory will be cleared and the
button will function as Channel Return, by switching
back and forth between the last two channels that are
tuned.This feature also works for external inputs.