Toshiba REGZA 46RV530U, Руководство по обслуживанию

Страница: 7 / 16

Setting Panel Option Data and SET-ID Data
1. Panel option data is subject to OP4 and OP5.
Enter to service mode and select menu of OP4 or OP5 by pressing CH or CH during display of adjustment
menu. After selecting OPT4 or OPT5, press + or - to set OPT4 or OPT5 value as table below.
2. Whenever using new MAIN PC board to the set, set the SET-ID data according to panel option data.
Panel Maker OPT 4
MODEL SIZE TOP Running Change TOP Running Change OPT 3 OPT 5 SET-ID
RV530U 46 Samsung - 6AH - 60H 00H 93H
Exit from Service Mode
Pressing POWER button to turn off the TV once.
Firmware Update Process
Updating this chassis family is accomplished using an SD card furnished by Toshiba. With the unit operating, insert the card
into the card slot labeled “Service only” located on either the side or back of the instrument. After the card is inserted, simply
follow the step by step update instructions displayed on the screen.
LED BLINK CODES
The green and yellow LED lights on the TV (at the bottom center of the TV) indicate the TV's status, as described below:
Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the
yellow LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction.
6