Toshiba RD-X2U, Руководство по обслуживанию

Страница: 8 / 58

1-1-5. Operation panel door
1. Open the operation panel door (1).
2. Release two claws and unhinge the door (1). (Same
operation on the left and right doors.)
Fig. 2-1-5
1-1-6. RAM Drive
1. Remove the HDD. (Refer to item 1-1-2.)
2. Remove the front panel. (Refer to item 1-1-3.)
3. Disconnect a connector (1).
4. Remove four screws (2), disconnect a connector (3),
then remove the RAM drive (4).
Fig. 2-1-6
Screws (1)
Connector (3)
Front panel (5)
Tape (2)
Tape (2)
Flexible cable (4)
Flexible cable (4)
Claw
Claws
Claw
1-1-3. Front Panel
1. Remove the top cover. (Refer to item 1-1-1.)
2. Remove the HDD. (Refer to item 1-1-2.)
3. Remove five screws (1).
4. Peel off two tapes (2).
5. Disconnect a connector (3) and three flexible cables
(4).
6. Release five claws, then remove the front panel (5).
Fig. 2-1-3
1-1-4. Tray door
1. Remove a spring (1).
2. Remove the tray door (2) while slightly bending it
Fig. 2-1-4
Front panel
Hinge
Claw
Claw
Operation panel door (1)
Screws (2)
Connector (3)
Connector (1)
RAM drive (4)
Spring (1)
Tray door (2)