1-1-4. RAM Drive
1. Remove the top cover. (Refer to item 1-1-1.)
2. Remove the HDD. (Refer to item 1-1-2.)
3. Remove the front panel. (Refer to item 1-1-3.)
4. Remove the Digital Tuner Module. (Refer to item 1-2-1.)
5. Remove two tapes (1).
6. Remove six screws (2), then remove the RAM drive (3).
7. Disconnect the flexible cable (4) and the connector (5).
8. Remove the shield cover (6) from the RAM drive (3).
Note:
• Attach the tapes (1) as they were after the RAM drive is replaced.
Fig. 2-1-4
Connector (5)
Shield cover (6)
Tape (1)
Tape (1)
Screws (2)
RAM drive (3)
Flexible cable (4)
