Toshiba RBC-TRP100E, Руководство по установке

Страница: 14 / 25

13 EN
Branch Kit 1:3
„ Wiring Diagram
REQUIREMENT
• The remote controller wiring has no polarity. Connections to terminals A and B of an
indoor unit may be replaced with each other.
• The remote controller wires and power supply wire must not be in direct contact or in the
same conduit pipe. (Doing so may cause a malfunction of the control system due to
noise.)
„
Wiring Specification
Specification of Wires Between Units and Numbers of Wires.
Procure necessary parts and perform all connection work locally.
Outdoor unit - indoor unit
(header unit)
No. of wires 4 (Include ground wire)
Wire diameter H07RN-F or 60245IEC66 1.5 mm
2
or more
Indoor unit
(header unit) - indoor unit
(follower unit)
No. of wires 2
Wire diameter H07RN-F or 60245IEC66 1.5 mm
2
or more
Remote controller wiring
No. of wires 2 (Shield wire)
Wire diameter Between 0.5 mm
2
and 2 mm
2
(up to 200 m)
Grounding wire of indoor unit H07RN-F or 60245IEC66 1.5 mm
2
or more
1 2 3
A B
F
H
E
G
3
A B
3 2 1 2 1
A B
1 2 3
L N
1 2 3
L1 L2 L3 N
H H
Remote
Controller
Header
Indoor
Unit
Outdoor
Unit
Follower
Indoor
Unit
Power supply
Follower
Indoor
Unit
<RAV-SM1603AT-E> <RAV-SM2244AT, SM2804AT series>
Power supply