Toshiba RBC-AMSU51-EN, Руководство пользователя

Страница: 32 / 52

– 31 –
Owner’s Manual
 Set temp. range limit
Set the temperature range for each operation mode.
When an error occurs during setting
“Error” appears on the display when the [ MENU] button is pushed under either condition:
1) the upper limit value falls below the lower limit
2) the lower limit value exceeds the upper limit
Push the [ CANCEL] button to erase the error message or wait for 10 seconds until the message disappears.
The screen returns to the “Set temp. range limit” screen.
Priority for the Set temp. range limit function
Set the same settings for the Set temp. range limit on each remote controller when the dual remote controller
system is used.
NOTE
The operation at the temperature beyond the temperature range may be performed in the following cases:
1.In case that the different values of temperature are set on each remote controller when the dual remote controller
system is used.
2.In case that the temperature beyond the temperature range is set on the central control remote controller and the
wireless remote controller.
1
Push the [
∧
] / [
∨
] button to select
“2. Set temp. range limit” on the “Energy
saving” screen, then push the “
Set” [ F2] button.
2
Push the [
∧
] / [
∨
] button to set the
temperature.
 Push the “
←
” [ F1] /
“
→
” [ F2] button to set the
value.
3
Push the [ MENU] button.
 The screen returns to the “Energy saving”
screen.
Energy saving(1/2)
1.Energy saving operation
2.Set temp. range limit
3.Return back
<ON>
<OFF>
Set
Return
Set
Set temp. range limit
Minimum - Maximum
Cool
18.0°C - 29.0°C
Heat 18.0°C - 29.0°C
Dry 18.0°C - 29.0°C
Auto 18.0°C - 29.0°C
Return Fix