12
Memorize the frequently used operation setting by the MEMO button
for convenience.
Start the air conditioner in the operation mode which you want the
remote controller to memorize.
Push the button as follows while the air conditioner is in operation.
(1) MEMO button
Push this button briefly to standby memorizing the setting.
All the icons currently displayed except for the clock display and
mark flashes.
(2) MEMO button
Push and hold the MEMO button for more than 3 seconds while
the display flashes.
The mark is indicated and the setting is memorized.
•
If you do not push the MEMO button within 3 seconds or if you
push another button, the MEMORY setting is cancelled.
•
Operation modes which can be memorized with the MEMO button
are MODE, Temperature, FAN, TIMER and High POWER.
To operate the air conditioner with the setting memorized by the
MEMO button.
(1) PRESET button
Push the PRESET button. The setting memorized with the MEMO
button will be indicated and the air conditioner operates with
regards to the setting.
•
The OPERATION lamp (green) on the display panel of the indoor
unit goes on, and operation starts after approximately 3 minutes.
•
Initial setting:
MODE
: AUTO
Temperature : 22
MEMORY/PRESET OPERATION
PRESET
FAN
MODE
Hi-POWER
ON
OFF
SET
CLR
ECO
AUTO
TIMER
CLOCK CHECK
RESET
FILTER
START/STOP
FIX
MEMO
SWING
(1)
(2)
PRESET
FAN
MODE
Hi-POWER
ON
OFF
SET
CLR
ECO
AUTO
TIMER
CLOCK CHECK
RESET
FILTER
START/STOP
FIX
MEMO
SWING
(1)
