Toshiba RAV-SM404SDT-E, Руководство пользователя

Страница: 12 / 22

Toshiba XXXXXXX( X /X)
– 11 –
Slim Duct Type
Owner’s Manual
6
HOW TO ENABLE POWER SAVING MODE
Push button during operation.
• The air conditioner enters power saving mode.
•
appears on the display.
To cancel the power saving operation, push button again.
• disappears.
NOTE
• When other electric appliances are used at the same time, to avoid triggering the circuit breaker,
power saving mode is recommended. Of course you can use power saving mode to save energy as
well.
• Power saving mode consumes less energy, but may not heat/cool the room as much as normal mode.
(The maximum current is limited of the normal mode.)
• To adjust the power-save settings, see “How to set up power saving mode” in ADVANCED
SETTINGS.
• Even when operation start/stop, operation mode change, or power reset is performed during the
power saving mode, the power saving mode is retained until the next operation.
11-EN
+00EH99932001_ALL_SlimDuct_OM.book Page 11 Friday, March 7, 2008 2:47 PM