– 80 –
Set the remote controller as ”Header remote controller (Master)” or “Follower remote controller (Sub)” when the
dual remote controller system is used.
Carry out the setting operation while the indoor unit is stopped. (Turn off the air conditioning unit before starting
the setting operation.)
Initial setting(2/2)
6.Header/Follower
7.Language
8.Press & hold 4 sec.
9.Summer time
10.Clock display
Set
Return
Header/Follower
Header
remote controller
Follower
(Master)
(Sub)
remote controller
Return
Fix
1
Push the [
] / [
] button to
select “6. Header/Follower” on the “Initial
setting ” screen, then push the
“
S
et
Set” [
F2
F2] button.
2
Push the [
] / [
] button to
select the setting.
3
Push the [
MENU] button.
→
“ Setting” appears on the screen, then the
screen returns to the “Initial setting” screen.
Note for the Header/Follower setting
• Set the RBC-AMS55E-ES, RBC-AMS55E-EN remote controller as the Header remote controller when the
dual remote controller system is used.
• The RBC-AMS55E-ES, RBC-AMS55E-EN remote controller can be used as the Follower remote controller
when the dual remote controller system is used that consists of two RBC-AMS55E-ES, RBC-AMS55E-EN
remote controllers.
• The following functions are not available when the remote controller is set as the Follower remote controller:
Schedule timer / Off reminder timer / Night operation / Energy saving operation / Return back / Saving
operation / Power consumption / Reset power consumption data.
NOTE
• Some functions are not available when the remote controller is set as the Follower remote controller.
• In the dual remote controller system, the latter operation overrides the former.
• The remote controller is set as “Header remote controller” as factory default.
• If the Header (Master) / Follower (Sub) remote controller settings are not set correctly, the “E01,” “E03,” or
“E09” check code is displayed.
