manualshive.com logo in svg

Toshiba RAS-4M27UAV-E, Руководство по обслуживанию

Поделиться
Скачать
Toshiba RAS-4M27UAV-E Скачать руководство пользователя страница 75

– 75 –

 

9-3. Auto Restart Function

This indoor unit is equipped with an automatic restarting function which allows the unit to restart operating with the 
set operating conditions in the event of a power supply being accidentally shut down.
The operation will resume without warning 3 minutes after power is restored.
This function is not set to work when shipped from the factory. Therefore it is necessary to set it to work.

9-3-1. Setting the Auto Restart Function

To set the auto restart function, proceed as follows:
The power supply to the unit must be on ; the function will not set if the power is off.
Push the [RESET] button located in the center of the front panel continuously for 3 seconds.
The unit receives the signal and beeps 3 times.
The unit then restarts operating automatically in the event of power supply being accidentally shut down.

• When the unit is standby (Not operating)

• When the unit is in operation

NOTE

• After restarting the air conditioner by the AUTO RESTART OPERATION, the louver swing (AUTO) operation 

doesn’t resume.

• While the PURE indicator (Orange) is on, the RESET button has the function of air purifier reset button.

Operation

Motions

Push [RESET] button for more than 
3 seconds. (Less than 10 seconds)

The unit is on standby.

(Push [RESET] button for more than 3 seconds.)

The unit starts to operate.

The green indicator is on.

After approx. 3 seconds,

The unit beeps 3 times and 
continues to operate.

The green indicator flashes for 
5 seconds.

If the unit is not required to operate at this time, push [RESET] button 
once more or use the remote controller to turn it off.

Operation

Motions

Push [RESET] button for more than 
3 seconds. (Less than 10 seconds)

The unit is in operation.

The green indicator is on.

(Push [RESET] button for more than 3 seconds.)

The unit stops operating.

The green indicator is turned off.

After approx. 3 seconds,

The unit beeps 3 times.

The green indicator flashes for 
5 seconds.

If the unit is required to operate at this time, push [RESET] button once 
more or use the remote controller to turn it on.

K

K

K

K

+00A10-023_01EN.book  Page 75  Wednesday, April 6, 2011  2:43 PM

Содержание RAS-4M27UAV-E

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды