Toshiba RAS-4M23SACV-E, Руководство по обслуживанию

Страница: 106 / 121

– 106 –
Screw
Screw
ng Secure using
crew the fixing screw
ng Secure using
crew the fixing screw
d (Right) Motor band (Right)
Fan motor leads
Raise the
left side
Pull out here
No.
W
X
Part name
Fan motor
Cross flow fan
Procedures
1) Follow to the procedure in the item
S
.
2) Loosen the set screw of the cross flow fan.
3) Remove two fixing screws of the motor
band (Right), and then remove the motor
band (Right).
4) Pull the fan motor outward.
In assembling work, install the fan motor
as follows.
• When assembling the fan motor, the fan
motor must be installed in such a way
that the fan motor leads will be taken out
is positioned at the bottom front.
• After assembling the two hooking claws
of the motor band (right) into the main
body, position the fan motor, insert it, and
then secure the motor band (right) using
the two fixing screws.
1) Follow to the procedure in the item
V
.
2) Remove the heat exchanger fixing holder
by removing the two fixing screws used to
secure it.
3) Loosen the set screw of the cross flow fan.
4) Lift the left side of the heat exchanger, and
pull out the cross flow fan.
Remarks