11
EN
EN
GL
IS
H
Start
a
START/STOP button
Push this button to start the air conditioner.
b
Mode select button (MODE)
Select Cool
, Heat
, or Fan only . (For cooling only model)
c
Temperature button
Set the desired temperature.
When the air conditioner is in FAN ONLY operation, the temperature display is not
indicated.
d
Fan speed button (FAN)
Select one of “AUTO”, LOW , LOW
+
, MED
, MED
+
,
HIGH .
• The OPERATION lamp (green) on the switch panel of the indoor unit goes on. And
operation starts after approximately 3 minutes.
(If you select FAN ONLY mode, the unit will start immediately.)
• The
: Fan only mode does not control temperature.
Therefore, perform only steps
a
,
b
and
d
to select this mode.
Stop
START/STOP button
Push this button again to stop the air conditioner.
Start
a
START/STOP button
Push this button to start the air conditioner.
b
Mode select button (MODE)
Select DRY
c
Temperature button
Set the desired temperature.
• The fan speed display indicates AUTO.
• The OPERATION lamp (green) on the switch panel of the indoor unit lights, and
operation starts after approximately 3 minutes.
Stop
START/STOP button
Push this button again to stop the air conditioner.
COOLING/HEATING/FAN ONLY OPERATION
DRY OPERATION