13
AM
PM
HiPOWER
START/STOP
PRESET
ON
OFF
˚
C
:
AM
PM
:
P
AUT
UTO
MODE
AUTO
FAN
ECO
TIMER
TIMER
Hi-POWER
SWING
MEMO
FIX
FILTER
RESET CLOCK CHECK
ON
OFF
SET
CLR
1
2
AM
PM
HiPOWER
START/STOP
PRESET
ON
OFF
˚
C
:
AM
PM
:
P
AUT
UTO
MODE
AUTO
FAN
ECO
TIMER
TIMER
Hi-POWER
SWING
MEMO
FIX
FILTER
RESET CLOCK CHECK
ON
OFF
SET
CLR
1
MEMORY/PRESET OPERATION
Memorize the frequently used operation setting by the MEMO button for
convenience.
Start the air conditioner in the operation mode which you want the remote
controller to memorize.
Push the button as follows while the air conditioner is in operation.
1
MEMO button
Push this button briefly to standby memorizing the setting.
All the icons currently displayed except for the clock display and
P
mark flashes.
2
MEMO button
Push and hold the MEMO button for more than 3 seconds while the
display flashes.
The
P
mark is indicated and the setting is memorized.
• If you do not push the MEMO button within 3 seconds or if you push
another button, the MEMORY setting is cancelled.
• Operation modes which can be memorized with the MEMO button are
MODE, Temperature, FAN, TIMER and High power.
To operate the air conditioner with the setting memorized by the MEMO
button.
1
PRESET button
Push the PRESET button. The setting memorized with the MEMO
button will be indicated and the air conditioner operates with regards
to the setting.
• The OPERATION lamp (green) on the switch panel of the indoor unit
goes on, and operation starts after approximately 3 minutes.
• Initial setting :
MODE
: AUTO
Temperature : 22