Toshiba RAS-22N3AV2-A, Руководство по обслуживанию

Страница: 64 / 109

FILE NO. SVM-13003
–
63
–
10-5-3. Test operation
To switch the TEST RUN (COOL) mode, press
[RESET] button for 10 sec.
(The beeper will make a short beep.)
Fig. 10-5-
3
10-5-4. Auto restart setting
This product is designed so that, after a power failure,
it can restart automatically in the same operating mode
as before the power failure.
Information
The product was shipped with Auto Restart function
in the off position. Turn it on as required.
<How to set the auto restart>
1. Press and hold the [
RESET]
button on the indoor unit
3 seconds to set the operation. (3 beep sound and
OPERATION lamp blink 5 time/sec for 5 seconds)
2. Press and hold the [RESET] button on the indoor
unit for 3 seconds to cancel the operation. (3 beep
sound but OPERATION lamp does not blink)
• In case of ON timer or OFF timer are set, AUTO
RESTART OPERATION dose not activate.
RESET button