EN
ES
FR
IT
DE
PT
PL
CZ
RU
CR
HU
TR
NL
GR
SV
FI
NO
DK
RO
BG
EE
LV
SK
SI
1
Press
FIX
: Move the louver in the
desired vertical direction.
2
Press
SWING
: Swing the air
automatically and press again to stop.
3
For horizontal direction, adjust
manually.
AIR FLOW DIRECTION
3
Note:
• Do not move the louver manually by others.
• The louver may automation positioning by some operation mode.
ONE-TOUCH
5
Press the “ONE-TOUCH” button for fully automated operation that is customized
to the typical consumer preferences in your region of the world. The customized
settings control temperature air
fl
ow strength, air
fl
ow direction and other settings
to provide you alternate contact with “ONE-TOUCH” of the button. If you prefer
other settings you can select from the many other operating functions of your
Toshiba unit.
Press
ONE-TOUCH
: Start the operation.
AUTOMATIC OPERATION
6
To automatically select cooling or fan only operation
1. Press
MODE
: Select A.
2. Press
TEMP
: Set the desired temperature.
COOLING / FAN ONLY OPERATION
7
1. Press
MODE
: Select Cool or Fan only
.
2. Press
TEMP
: Set the desired temperature.
Cooling: Min. 17
o
C, Fan Only: No temperature indication
3. Press
FAN
: Select AUTO, LOW , LOW+ , MED
, MED+
, or
HIGH
.
DRY OPERATION
8
For dehumidi
fi
cation, a moderate cooling performance is controlled
automatically.
1.
Press
MODE
: Select Dry .
2.
Press
TEMP
: Set the desired temperature.
AIR PURIFYING OPERATION
(SKDX Only)
9
Press
PURE
to start and stop plasma air puri
fi
er and air ionizer operation.
The plasma air puri
fi
er and air ionizer can be activated or deactivated by pressing
the PURE button. The air ionizer starts in conjunction with plasma air puri
fi
er
operation.
Note:
The FILTER indicator (orange) turns on after PURE operation is performed
for about 1000 hours.
Hi-POWER OPERATION
10
To automatically control room temperature and air
fl
ow for faster cooling operation
(except in DRY and FAN ONLY mode)
Press
Hi-POWER
: Start and stop the operation.
ECO OPERATION
11
To automatically control room to save energy (except in DRY and FAN ONLY
mode)
Press
ECO
: Start and stop the operation.
Note:
Cooling operation; the set temperature will increase automatically 1 degree/
hour for 2 hours (maximum 2 degrees increase).
REMOTE CONTROL
4
1
Infrared signal emitter
2
Start/Stop button
3
Mode select button (MODE)
4
Temperature button (TEMP)
5
Fan speed button (FAN)
6
Swing louver button (SWING)
7
Set louver button (FIX)
8
On timer button (ON)
9
Off timer button (OFF)
!
Sleep timer button (SLEEP)
"
Setup button (SET)
#
Clear button (CLR)
$
Memory and Preset button (PRESET)
%
One-Touch button (ONE-TOUCH)
&
High power button (Hi-POWER)
(
Economy button (ECO)
)
Quiet button (QUIET)
~
Comfort sleep button (COMFORT SLEEP)
+
Plasma Air Puri
fi
er button (PURE)
(SKDX
Only)
,
Filter reset button (FILTER)
-
Clock Reset button (CLOCK)
.
Check button (CHK)
PRESET
ONE-TOUCH
QUIET
SWING
TIMER
ON
FILTER
CHK
CLOCK
OFF
CLR
SLEEP
SET
FIX
Hi-POWER ECO
PURE
COMFORT
SLEEP
MODE
TEMP
FAN
5
4
3
~
(
&
9
-
"
#
$
%
)
,
.
8
7
6
+
1
2
!
PREPARATION BEFORE USE
2
Preparing Filters
1. Open the air inlet grille and remove the air
fi
lters.
2.
Attach
the
fi
lters. (see detail in the accessory sheet).
Loading Batteries
1. Remove the battery cover.
2. Insert 2 new batteries (AAA type)
following the (+) and (–) positions.
Clock Setup
1.
Push
CLOCK
●
by tip of the pencil.
If timer indication is
fl
ashing, go to the next step 2.
2.
Press
ON
or
OFF
: adjust the time.
3.
Press
SET
: Set the time.
Remote Control Reset
1. Remove the batteries.
2.
Press
.
3. Insert the batteries.
A
C
L
TEMPORARY OPERATION
12
In case of the misplaced or discharged remote control
•
Pressing the RESET button, the unit can start or
stop without using the remote control.
•
Operation mode is set on AUTOMATIC operation,
preset temperature is 24°C and fan operation is
automatic speed.
TIMER OPERATION
13
Daily timer allows the user to set both the ON & OFF timers and will be
activated on a daily basis.
Setting Everyday Timer
Setting the ON Timer
Setting the OFF Timer
1
Press
ON
: Set the desired ON timer.
Press
OFF
: Set the desired OFF timer.
2
Press
SET
: Set the timer.
Press
SET
: Set the timer.
3
Press
CLR
: Cancel the timer.
Press
CLR
: Cancel the timer.
• During the every day timer is activating, both arrows ( , ) are indicated.
Note:
• Keep the remote control in accessible transmission to the indoor unit;
otherwise, the time lag of up to 15 minutes will occur.
• The setting will be saved for the next same operation.
1
Press
ON
: Set the ON timer.
3
Press
SET
.
2
Press
OFF
: Set the OFF timer.
4
Press
SET
button during the ( or )
mark
fl
ashing.
Set the timer when the air conditioner is operating.
1110650101.indb 3
1110650101.indb 3
3/11/08 4:46:23 PM
3/11/08 4:46:23 PM
