Toshiba RAC-WK0511CMU Скачать руководство пользователя страница 4

Страница: 4 / 42

Page 4

User Manual

• Do not open the unit during operation.

It may cause electric shock.

• Do not use the power cord near fl ammable gas or combustibles, such as gasoline,

benzene, thinner, etc.
It may cause an explosion or fi re.

WARNING

• When the air fi lter is to be removed, do not touch the metal parts of the unit.

It may cause an injury.

• When the unit needs cleaning, switch off , and turn off the circuit breaker.

Do not clean unit when power is on as it may cause fi re and electric shock, it may cause
an injury.

• Stop operation and close the window in storm or hurricane.

Operation with windows open may cause water leak into the room.

• Do not place obstacles around air-inlets or inside of air-outlet.

It may cause failure or accident.

• Do not use strong detergent such as wax or thinner but a soft cloth, or else risk

damaging the product.

• Use caution when unpacking and installing. Sharp edges could cause injury.

• Do not clean the air conditioner with water.

Water may enter the unit and degrade the insulation. It may cause an electric shock.

• Do not put a pet or house plant where it will be exposed to direct air fl ow.

This could injure the pet or plant.

• Hold the plug by the head of the power plug when taking it out.

It may cause electric shock and damage.

• Ensure that the installation is properly secured under risk of the product falling.

• Do not place heavy object on the power cord and ensure that the cord is not

compressed.
There is danger of fi re or electric shock.

• If water enters the unit, turn the unit off at the power outlet and switch off the circuit

breaker. Isolate supply by taking the power-plug out and contact a qualifi ed service
technician.

• Ventilate the room well when used together with a stove, etc.

An oxygen shortage may occur.

• Do not use for any other purpose than room comfort.

Do not use this air conditioner to preserve precision devices, food, pets, plants, and art
objects. It may cause deterioration.

• Turn

off the main power switch when not using the unit for a long time.

• Always insert the fi lters securely. Clean fi lter once every two weeks.

Operation without fi lters may cause failure.

• Do not drink water drained from air conditioner.

CAUTION

fety

Precautions

Содержание RAC-WK0511CMU











































Результаты поиска

Содержание RAC-WK0511CMU

Отзывы:

Похожие инструкции для RAC-WK0511CMU

Бренды по названию

Популярные бренды

Toshiba RAC-WK0511CMU, Руководство пользователя

Результаты поиска

Содержание RAC-WK0511CMU

Отзывы:

Похожие инструкции для RAC-WK0511CMU

Бренды по названию

Популярные бренды