R
emote Control Specifi
cations
Function Buttons
REMOTE CONTROL INSTRUCTIONS
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the Operating Instructions section of this manual.
RG57H4(B)/BGEF
l
e
d
o
M
Rated voltage
3.0V (Dry batteries R03/LR03x2)
Signal receiving range
8 m (approx. 26 ft.)
Environment
-5°C ~ 60°C (23°F ~ 140°F)
FOLLOW ME
Temperature sensing and room
temperature display button.
SHORT CUT
Sets and activates your favorite pre-settings.
Turns the unit on or off.
TEMP
Increases temperature in 1°C (1°F) increments.
Max. temperature is 30°C (86°F).
TIMER ON
Sets timer to turn unit on (see
How to Use
Basic Functions
for instructions)
TIMER OFF
Sets timer to turn unit off (see
How to Use
Basic Functions
for instructions)
LED
Turns indoor unit's LED display on and off.
If you are sensitive to light while sleeping,
you can press the LED button to turn off
the LED display on the unit. Press the
button again to turn it back on.
SWING
Starts and stops
louver movement.
SLEEP
Saves energy during
sleeping hours.
TEMP
Decreases temperature in 1°C (1°F) increments.
Max. temperature is 17°C (62°F).
NOTE:
Pressing and holding and buttons
together for 3 seconds will alternate the
temperature display between the °C & °F scale.
Selects fan speeds in the
following order:
AUTO LOW MED HIGH
MODE
Scrolls through operation modes
as follows:
AUTO COOL DRY HEAT FAN
NOTE:
Please do not select HEAT mode
if the machine you purchased is
cool-only type. Heat mode is not
supported by cool-only models.
ON/OFF
FAN SPEED
Remote control and
App instructions
PRESET
MARCHE/
ON
ARRÊTER/
OFF
To prevent damage,remove the batteries when not
being used for a long time.
ote
N
Page 20
User Manual
Содержание RAC-PD0812CRRC
Страница 32: ......