57
Getting Started
Adding memory (optional)
5.375 x 8.375 ver 2.3
For more information on memory options, check the
accessories information that came with your computer, or
visit accessories.toshiba.com.
Additional memory modules can be installed in the memory
module slots on the base of the computer. You will need a
small Phillips screwdriver for this procedure.
For more information on memory options, check the
accessories information that came with your computer, or
visit
.
Before adding external devices or memory, Toshiba
recommends setting up your software. See
Installing a memory module
You need a small Phillips screwdriver for this procedure. The
computer has two memory module slots located on the base
of the computer. One or both of the slots are populated with
memory modules during the manufacturing process.
To increase the computer’s memory capacity, add a new
memory module, or replace a current memory module:
If you use the computer for a long time, the memory module
will become hot. If this happens, let the module cool to room
temperature before you replace it.
To avoid damaging the computer’s screws, use a small Phillips
screwdriver that is in good condition.
NOTE
