158
If Something Goes Wrong
ExpressCard
®
problems
The computer stops working (hangs) when you
insert an ExpressCard
®
.
1
If the ExpressCard
®
causes the system to hang, hold
down the ON/OFF button until the computer shuts down
(approximately 10 seconds).
2
Restart the computer and press the
F8
key immediately
after pressing the ON/OFF button.
3
From the menu, select
Safe Mode
.
4
From the Start screen, type
Device
after the computer
starts.
5
Click or touch
Settings
, and then
Device Manager
.
6
Look for an item with a yellow shield with an exclamation
mark in it. This indicates there is a resource conflict. Do
one of the following:
❖
If there is a resource conflict, right-click the item
marked with the yellow exclamation point and select
Uninstall
from the menu, and then proceed to
step 6.
❖
If no resource conflict is indicated, contact the card
manufacturer for additional troubleshooting
assistance.
7
Click or touch
OK
to confirm the uninstall.
8
In the Device Manager window, click or touch the
Action
menu and select
Scan for Hardware
changes
.
9
Restart the computer normally.
10
If the issue is not resolved, contact the card
manufacturer for additional troubleshooting assistance.
Hot swapping (removing one ExpressCard
®
and
inserting another without turning the computer off)
fails.
Follow this procedure before you remove an ExpressCard
®
:
1
If you are not currently on the Desktop, choose the
Desktop tile on the Start screen, otherwise skip to step
2
Prepare the card for removal by clicking on or touching
the
Show hidden icons
button (
), if necessary, in the
notification area and then selecting the
Safely Remove
Hardware and Eject Media
icon.