manualshive.com logo in svg

Toshiba Portege R200, Руководство по обслуживанию

Поделиться
Скачать
Toshiba Portege R200 Скачать руководство пользователя страница 2

 

ii 

[CONFIDENTIAL] 

 

PORTEGE R200 Maintenance Manual (960-519) 

 

 

 

 

 

 

 

 

 

 

Copyright 

© 2005 by Toshiba Corporation. All rights reserved.  Under the copyright laws, this manual 
cannot be reproduced in any form without the prior written permission of Toshiba.  No patent 
liability is assumed with respect to the use of the information contained herein. 

Toshiba PORTEGE R200 Maintenance Manual 

First edition April 2005 

Disclaimer 

The information presented in this manual has been reviewed and validated for accuracy.  The 
included set of instructions and descriptions are accurate for the PORTEGE R200 series at 
the time of this manual's production.  However, succeeding computers and manuals are 
subject to change without notice.  Therefore, Toshiba assumes no liability for damages 
incurred directly or indirectly from errors, omissions, or discrepancies between any 
succeeding product and this manual. 

Trademarks 

IBM is a registered trademark and IBM PC is a trademark of International Business 
Machines Corporation.  
Intel, Intel SpeedStep and Pentium are trademarks or registered trademarks of Intel 
Corporation or its subsidiaries in the United States and other countries/regions. 
Windows and Microsoft are registered trademarks of Microsoft Corporation. 
Bluetooth is a trademark owned by its proprietor and used by TOSHIBA under license. 
OmniPass is the trademark of Softex Incorporated.  
Other trademarks and registered trademarks not listed above may be used in this manual. 

Содержание Portege R200



























































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды