24
TV operation
Adjust the volume level by pressing VOL
+
or
–
.
The volume level will be indicated on the screen
by green bars. As the volume level increases, so
do the number of bars. If the volume decreases,
the number of green bars also decreases.
Set the TV/CABLE selection to the appropriate
position
%
.
1
2
3
Press Direct channel selection buttons (0–9)
to select the channel.
TV mode direct channel selection
When the TV/CABLE selection is in the TV
position, all channels can be instantly selected by
using two buttons. (for example, to select channel
2, press “
0
”, then “
2
”. If you
press only “
2
”, channel
selection will be delayed
for a few seconds.) For
channels 10 and above,
press the 2 digits in order.
4
Notes:
• If a channel with no broadcast is selected, the sound will auto-
matically be muted.
• If a station being viewed stops broadcasting, the TV will auto-
matically shut itself off after 15 minutes.
To turn on the unit, press POWER.
The Power indicator will light.
• Every time you turn on the TV, the unit starts from
TV/VCR mode. When you use TV/VCR after DVD
operation, press
TV/VCR
.
TV
- VHF/UHF channels
CABLE - Cable TV channels
CABLE mode direct channel selection
When the TV/CABLE selection is in the CABLE
position, channels can be selected as follows:
TO SELECT CABLE TV CHANNELS:
1-9:
Press “
0
” twice, then 1-9 as needed.
Example, to select channel 2, press “
002
”.
10-12:
Press “
0
”, then the remaining 2 digits.
Example, to select channel 12, press “
012
”.
13-99:
Press the 2 digits in order. Example, to
select channel 36, press “
36
”.
100-125: Press the 3 digits in order. Example, to
select channel 120, press “
120
”.
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding
channel will be selected in 2 seconds.
Cable TV
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
TV
VHF
2-13
UHF
14-69
VOLUME
32
CH 02
TV operation
POWER
TV operation
5T90101A [E]p23-27
3/8/05, 10:23 AM
24
