Toshiba MV20P2 страница 3 Скачать руководство пользователя

Страница: 3 / 56

IMPORTANT SAFEGUARDS

S3126A

PORTABLE CART WARNING

(symbol provided by RETAC)

READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning the exterior cabinet only.

ATTACHMENTS

The manufacturer of this unit does not make any recommendations for attachments, as they may cause haz-

ards.

WATER AND MOISTURE

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet

basement, or near a swimming pool.

ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table.

The unit may fall, causing serious injury, and serious damage to the unit.

8A. An appliance and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the appliance and cart

combination to overturn.

VENTILATION

Slots and openings in the cabinet back or bottom are provided for ventilation, and to ensure reliable operation of

the unit, and to protect it from overheating. These openings must not be blocked or covered. The openings

should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never

be placed near or over a radiator or heat source. This unit should not be placed in a built-in installation such as

a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10. POWER SOURCE

This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure

of the type of power supply to your home, consult your appliance dealer or local power company. For units

intended to operate from battery power, or other sources, refer to the respective pages on this Owner’s Manual

for their operating instructions.

11. GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).

This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug

fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your

obsolete outlet. Instead of the polarized alternating-current line plug, your unit may be equipped with a 3-wire

grounding-type plug (a plug having a third (grounding) pin). This plug will only fit into a grounding-type power

outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to

replace your obsolete outlet.

Do not defeat the safety purpose of the grounding-type plug.

5L90101C P01-09

20/4/04, 16:32

Содержание MV20P2

























































Результаты поиска

Содержание MV20P2

Отзывы:

Похожие инструкции для MV20P2

Бренды по названию

Популярные бренды

Toshiba MV20P2, Руководство пользователя

Результаты поиска

Содержание MV20P2

Отзывы:

Похожие инструкции для MV20P2

Бренды по названию

Популярные бренды