Toshiba MMY-MAP0806HT8JP-E Скачать руководство пользователя страница 4

1

  Precautions for safety

The manufacturer shall not assume any liability for the damage 
caused by not observing the description of this manual.

 WARNING

General 

• Carefully read Owner’s Manual before starting the air conditioner. 

There are many important things to keep in mind for daily operation.

• Ask for installation to be performed by the dealer or a professional. 

Only a quali

fi

ed installer (*1) is able to install an air conditioner. If 

a non-quali

fi

ed person installs an air conditioner, it may result in 

problems such as 

fi

re, electric shock, injury, water leakage, noise 

and vibration.

• Do not use any refrigerant different from the one speci

fi

ed for 

complement or replacement. Otherwise, abnormally high pressure 

may be generated in the refrigeration cycle, which may result in a 

failure or explosion of the product or an injury to your body.

• Places where the operation sound of the outdoor unit may cause a 

disturbance. (Especially at the boundary line with a neighbor, install 

the air conditioner while considering the noise.) 

Transportation and storage

• When transporting the air conditioner, wear shoes with protective 

toe caps, protective gloves, and other protective clothing.

• When transporting the air conditioner, do not take hold of the bands 

around the packing carton. You may injure yourself if the bands 

should break.

• When stacking the packing cartons for storage or transportation, 

heed the precautions written on the packing cartons. Failure to heed 

the precautions may cause the stack to collapse.

• You shall ensure that the air conditioner is transported in stable 

condition. If you 

fi

nd any part of the product broken, contact your 

dealer.

Installation

• Only a quali

fi

ed installer(*1) or quali

fi

ed service person(*1) is allowed 

to carry out the electrical work of the air conditioner. Under no 

circumstances must this work be done by an unquali

fi

ed individual 

since failure to carry out the work properly may result in electric 

shocks and/or electrical leaks.

• After the installation work has been completed, have the installer 

explain about the circuit breaker positions. In the event that error 

has occurred in the air conditioner, set the circuit breaker to the OFF 

position, and contact a service person.

• If you install the unit in a small room, take appropriate measures 

to prevent the refrigerant from exceeding the limit concentration 

even if it leaks. Consult the dealer from whom you purchased the 

air conditioner when you implement the measures. Accumulation 

of highly concentrated refrigerant may cause an oxygen de

fi

ciency 

accident.

• Do not install the air conditioner in a location that may be subject to 

a risk of exposure to a combustible gas. If a combustible gas leaks 

and becomes concentrated around the unit, a 

fi

re may occur.

• Be sure to use the company-speci

fi

ed products for the separately 

purchased parts. Use of non-speci

fi

ed products may result in 

fi

re, 

electric shock, water leakage, etc. Have the installation performed 

by a professional.

• Con

fi

rm that earthing is performed correctly.

Operation

• Before opening the intake grille of the indoor unit or service panel of 

the outdoor unit, set the circuit breaker to the OFF position. Failure 

to set the circuit breaker to the OFF position may result in electric 

shocks through contact with the interior parts. Only a quali

fi

ed 

installer(*1) or quali

fi

ed service person(*1) is allowed to remove the 

intake grille of the indoor unit or service panel of the outdoor unit 

and do the work required.

• Inside the air conditioner are high-voltage areas and rotating parts. 

Due to the danger of electric shocks or of your 

fi

ngers or physical 

objects becoming trapped in the rotating parts, do not remove the 

intake grille of the indoor unit or service panel of the outdoor unit. 

When work involving the removal of these parts is required, contact 

a quali

fi

ed installer or a quali

fi

ed service person.

– 3 –  

5-EN 

6-EN

Содержание MMY-MAP0806HT8JP-E


























Отзывы: