Toshiba MMK-AP0073H, Руководство пользователя

Страница: 14 / 266

SMMS High-Wall Type
Owner’s Manual
– 13 –
Toshiba
Once you select the timer operation mode, the
settings are saved in the remote controller.
Thereafter, the air conditioner will start operating
under the same conditions when you simply press
the ON/OFF button of the remote controller.
If the clock display is flashing, you cannot set the
timer.
Follow the instructions in the section “SETTING
THE CLOCK” and then set the timer.
Combined timer (Setting both ON and
OFF timers simultaneously)
OFF timer —> ON timer
(Operation —> Stop —> Operation)
This feature is useful when you want to stop the air
conditioner after you go to sleep, and start it again
in the morning when you wake up or you return
home.
Example:
To stop the air conditioner and start it again next
morning.
▼
Setting combined TIMER
1. Press the OFF TIMER button to adjust the OFF
timer.
2. Press the ON TIMER button to adjust the ON timer.
3. Press the SET
button.
ON timer —> OFF timer
(Stop —> Operation —> Stop)
You can use this setting to start the air conditioner
when you wake up and stop it when you leave the
house.
Example:
To start the air conditioner next morning and stop it.
▼
Setting combined TIMER
1. Press the ON TIMER button to adjust the ON timer.
2. Press the OFF TIMER button to adjust the OFF
timer.
3. Press the SET button.
• Either ON or OFF timer function which is closer
to the current time, is activated first.
• If the same time is set for both ON and OFF
timers, no timer operation is performed.
Also, the air conditioner may stop operating.
Every day combined timer (setting both
ON and OFF timer simultaneously and
activate every day.)
This feature is useful when you want to use
combined timer at the same time every day.
▼ Setting combined TIMER
1. Press the ON TIMER button to adjust the ON timer.
2. Press the OFF TIMER button to adjust the OFF
timer.
3. Press the SET button.
4. After step 3, an arrow mark ( or ) flashes for
about 3 seconds and during this flashing, press the
SET
button.
• During the every day timer is activating, both
arrows ( , ) are indicated.
Cancel the timer operation
Press the CLR button.
Clock display
During the TIMER operation (ON-OFF, OFF-ON,
OFF timer) clock display is disappeared so as to
show the setting time. To see the present time,
press SET button briefly and the present time is
displayed about 3 seconds.
Operation
Stop
Operation again
OFF
ON
SET
Operation
Stop Stop
ON
OFF
SET
ON
OFF
SET
SET
CLR
13-EN
+1111050401_11L_SMMS_HighWall_OM_B5_print_ONLY.book Page 13 Friday, November 21, 2008 4:47 PM