─
4
─
• You shall ensure that the air conditioner is transported in stable
condition. If you
fi
nd any part of the product broken, contact your
dealer.
Installation
• Only a quali
fi
ed installer (*1) or quali
fi
ed service person (*1)
is allowed to carry out the electrical work of the air conditioner.
Under no circumstances must this work be done by an unquali
fi
ed
individual since failure to carry out the work properly may result in
electric shocks and/or electrical leaks.
• After the installation work has been completed, have the installer
explain about the circuit breaker positions. In the event that error
has occurred in the air conditioner, set the circuit breaker to the
OFF position, and contact a service person.
• If you install the unit in a small room, take appropriate measures
to prevent the refrigerant from exceeding the limit concentration
even if it leaks. Consult the dealer from whom you purchased the
air conditioner when you implement the measures. Accumulation
of highly concentrated refrigerant may cause an oxygen de
fi
ciency
accident.
• Do not install the air conditioner in a location that may be subject
to a risk of expire to a combustible gas. If a combustible gas leaks
and becomes concentrated around the unit, a
fi
re may occur.
• Be sure to use the company-speci
fi
ed products for the separately
purchased parts. Use of non-speci
fi
ed products may result in
fi
re,
electric shock, water leakage, etc. Have the installation performed
by a professional.
• Con
fi
rm that earthing is performed correctly.
Operation
• Before opening the intake grille of the indoor unit or service panel
of the outdoor unit, set the circuit breaker to the OFF position.
Failure to set the circuit breaker to the OFF position may result
in electric shocks through contact with the interior parts. Only a
quali
fi
ed installer (*1) or quali
fi
ed service person (*1) is allowed to
remove the intake grille of the indoor unit or service panel of the
outdoor unit and do the work required.
• Inside the air conditioner are high-voltage areas and rotating
parts. Due to the danger of electric shocks or of your
fi
ngers or
physical objects becoming trapped in the rotating parts, do not
remove the intake grille of the indoor unit or service panel of the
outdoor unit. When work involving the removal of these parts is
required, contact a quali
fi
ed installer or a quali
fi
ed service person.
• Do not move or repair any unit by yourself. Since there is high
voltage inside the unit, you may get electric shock when removing
the cover and main unit.
• Use of a stand more than 50 cm high to clean the
fi
lter of the
indoor unit or to carry out other such jobs constitutes working at
heights. Due to the danger of falling off the stand and injuring
yourself while working at heights, this kind of work should not be
done by unquali
fi
ed individuals. When this kind of work must be
carried out, do not do it yourself but ask a quali
fi
ed installer or a
quali
fi
ed service person to do it for you.
• Do not touch the aluminum
fi
n of the outdoor unit. You may injure
yourself if you do so. If the
fi
n must be touched, do not touch
it yourself but contact a quali
fi
ed installer or a quali
fi
ed service
person.
• Do not climb onto or place objects on top of the outdoor unit.
You may fall or the objects may fall off of the outdoor unit and
result in injury.
• Do not place any combustion appliance in a place where it is
directly exposed to the wind of air conditioner, otherwise it may
cause imperfect combustion.
7-EN
8-EN