manualshive.com logo in svg

Toshiba M400 - Portege - Core 2 Duo 1.83 GHz, Руководство по обслуживанию

Поделиться
Скачать
Toshiba M400 - Portege - Core 2 Duo 1.83 GHz Скачать руководство пользователя страница 415

Appendix J   Maintenance of TOSHIBA RAID 

Appendices

 

 

8.

 

When completing the rebuild, press “OK” to return to the main menu of 
Independent Setup Utility. 

Resume Rebuild 

During being suspended,[Resume Rebuild] is displayed in [Main Menu]. To start 
rebuilding suspended, follow the procedure below. 

1.

 

Put the cursor to the [Resume Rebuild] in the main menu of Indent Utility and 
press 

Enter

 key. 

2.

 

When [Rebuild Range] menu is displayed, the range to be rebuilt is designated. 
When [Effective] is selected, rebuild limit becomes valid and it rebuilds up to the 
rebuild limit. When [Whole] is selected, it rebuilds maximum capacity of array. 
The [Rebuild Range] menu is not displayed when the rebuild limit is not set or the 
rebuild limit is the same as the maximum capacity of array. Normally designation 
of [Effective] is adequate.  

3.

 

Put the cursor on “OK” in [Confirmation] and press 

Enter

 key. The rebuild starts. 

4.

 

During rebuilding, [Status] of [Physical Drive] becomes [REBILDING] and the 
progress rate, expected remaining time and the number of errors are displayed. 
During rebuilding, the [Rebuilding] dialog to select [Suspend] or [Abort] is 
displayed. It may take time depending on the drive capacity. 

5.

 

To suspend the rebuilding, put the cursor on [Suspend] (when aborting, on the 
[Abort]) and press 

Enter

 key. When [Confirmation] is displayed, put the cursor on 

[OK] and press 

Enter

 key. 

PORTEGE M400  Maintenance Manual (960-541) 

[CONFIDENTIAL]

 

J-17 

Содержание M400 - Portege - Core 2 Duo 1.83 GHz











































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды