Problem
Procedure
Computer shuts
down automatically.
Leave the computer off until it reaches room
temperature. If the computer has reached room
temperature and it still does not start, or if it starts
but shuts down quickly, contact TOSHIBA Support.
AC power
If you have trouble turning on the computer with the AC adaptor connected
you should check the status of the
Power
indicator. Please refer to the
section for further information.
Problem
Procedure
AC adaptor doesn’t
power the computer
Check the connections to make sure that the
power cord/adaptor is firmly connected to the
computer and a working power outlet.
Check the condition of the cord and terminals. If
the cord is frayed or damaged it should be
replaced, while if the terminals are soiled, they
should be cleaned with a clean cotton cloth.
If the AC adaptor still does not power the
computer, you should contact TOSHIBA Support.
Real Time Clock
Problem
Procedure
The BIOS setting
and system date/
time are lost.
The charge in the Real Time Clock (RTC) battery
has run out - you will need to set the date and time
in the BIOS setup application by using the
following steps:
1.
Press and hold the
F2
key, and then turn on
the computer. Release the
F2
key one second
after the computer is power on - the BIOS
setup utility will load.
2.
Set the date in the
System Date
field.
3.
Set the time in the
System Time
field.
4.
Press
F10
- a confirmation message will be
displayed.
5.
Press the
ENTER
key - the BIOS setup
application will end and the computer will
restart.
User's Manual
6-5