Toshiba LICSTAR-IV SE Скачать руководство пользователя страница 29

Страница: 29 / 262

SUBMASTER PANEL

Deleting submaster memory

Operating procedure

(1)

Press the DEL button on the SUBMASTER PANEL.

(2)

Press the REC/

button twice above the submaster fader the memory of

which is to be deleted.

Pressing the REC/

button once makes the REC/

button flash.

Pressing the REC/

button again makes the REC/

button and DEL button go out

and deletes the memory.

If the memory does not need to be deleted, press the CANCEL button.

[REC/

button LED display status]

ON (red)

: Recording complete

FLASH (red)

: Confirming overwrite-recording, edit recording, or memory deletion

OFF (red)

: Not yet recorded.

FLASH (green)

: Freezing in progress.

[DEL button LED display status]
ON

: Memory deletion is in progress.

Notes

•

Memory deletion cannot be performed on a submaster that is frozen.

4-3

Содержание LICSTAR-IV SE







































































































































































































































































Результаты поиска

Содержание LICSTAR-IV SE

Отзывы:

Toshiba LICSTAR-IV SE, Инструкция по эксплуатации, Страница: 29 / 262

Результаты поиска

Содержание LICSTAR-IV SE

Отзывы: