16
English
>?
Start
and press
.
The search will begin for all available stations. The
slide bar will move along the line as the search
progresses.
You must allow the television to complete the
search.
When the search is completed, the television will
automatically select channel 1. This may not be
a clear picture or the signal may be weak so the
station order can be changed using
ATV/DTV
Manual Tuning
in the
Installation
menu.
Please refer to page 18 in this manual to find out
more about ATV/DTV Manual Tuning.
8.
The Satellite Settings screen will appear. From
this window, you can add the satellites that you
wish to tune and configure detailed settings for
each one individually.
Highlight
Done
and press
.
9.
If your satellite dish is movable, the following
Positioning
screen will appear.
10.
>?
Positioning
, and
@J
the strongest signal level.
>?
Store Position
and press
to store the dish position.
Repeat steps 9 and 10 for the next satellite as
necessary.
If your satellite dish is not movable, the
Positioning screen will not appear.
Adjust the dish position manually for the
maximum Signal Level strength.
Highlight
Done
and press
.
11.
If the reception testing completes successfully,
the
Auto Tuning
startup screen will display.
>?
Scan Type
or
Search
Option
J
12.
>?
Scan type
among
Fast
Scan, Quick Scan
and
Full Scan
or select
Search Option
between
Free to Air
and
All
.
13.
>?
Start Scan
, and then
press
.
The television will start to search for available
DVB-S channels. The progress bar will indicate
the scan status.
When the search is complete, the
Auto Tuning
results screen will display the total number of
services found.
14.
>?
channel, and then press
to view.
