Toshiba JTNI6 Series, Инструкция по эксплуатации, Страница: 23 / 50

3.1 Setting Switches
Unified Controller TC-net 100 PCI express Card JTNI6 Instruction Manual
11
Before installing the card in a personal computer, set the station address of the
card, using the switches on the side of the card. (Refer to Figure 2-1 The card
appearance)
Use a small flat-blade screwdriver for this purpose.
3.1 Setting Switches
• Station address setting: STN-H, STN-L (hexadecimal rotary switches)
TC-net 100 station address switches. Set an address unique to the same
segment. Up to 254 station addresses from 01h to FEh can be set.
Table 3-1 Station Address Setting
Name Location Setting
Station address STN-H
STN-L Setting range: 01 to FE (h)
H (H address) : 0 to F (h)
L (L address: 0 to F (h)
Set a station address in hexadecimals.
The address 28 corresponds to 1C in hexadecimals (h).
So, turn STN-H to 1 and STN-L to C.
• Operation mode setting: MODE (4-bit DIP switches)
Keep all the DIP switches in the OFF position.
Table 3-2 Operation Mode Setting
Bit No. Function
Normal
Setting
Remarks
1 Reserved OFF
2 Reserved OFF
3 Synchronous node promotion
Prohibited/Permitted OFF ON: Permitted , OFF: Prohibited
4 Reserved OFF