Toshiba IPR16-X, Руководство пользователя

Страница: 103 / 111

87
EMERGENCY AGENT OVERVIEW
The Emergency Agent software is a utility that streams video across a Local Area Network to a Client PC when an alarm is detected
on the IPR unit. The video that streams across can be stopped, played forwards and backwards, in slow motion or real speed.
The utility is loaded at startup and placed in the taskbar. It constantly monitors for a signal from the IPR unit. When an alarm signal is
detected the Emergency Agent Image Viewer window opens and starts playing the video from the camera associated to the alarm.
Configuring the IPR
To enable the Emergency Agent on the IPR follow these steps:
1. Enter Setup and confirm you are in the Camera Setup Menu.
2. Select a camera and then associate sensor(s) to that camera using the
Sensor Connection checkboxes.
3. Click the Network Setup Button and make sure that Disable Remote
Control is not checked.
4. The Emergency Agent uses one port to transfer the data through (the
Emergency Port). The port can be adjusted inside the Network Setting
Menu if necessary. It is recommended that the default setting should be
used unless the port must be changed.
5. Click the Schedule Setup Button. Enter the IP Address of the computer
running the Emergency agent software.
6. Click the box next to the IP Address to enable it.
7. Select the Sensor Radio Button.
8. Create a schedule for the appropriate sensor
9. Click Apply.