Toshiba IPedge, Руководство по установке

Страница: 33 / 196

Installation Manual June, 2011 2-1
Chapter 2 – IP edge Hardware
POWER REQUIREMENTS Toshiba recommends an uninterruptible power supply (UPS) for the
IP
edge server. A UPS is the preferred power source since it provides
automatic switch-over to 120 VAC back-up in case of a loss of power. The
specific input voltage and current requirements for each server is listed
the specifications for each model.
IP edge SERVERS The IP edge hardware platform is available in two configurations. The
IP edge EC serving up to 200 users and the IP edge EM serving up to
1000 users. The servers are both 1U rackmount chassis. Refer to Figure
2-1 .
Figure 2-1 IP edge Server Hardware - Front View
EC SERVER For IP edge systems of up to 200 users. This server has one, front access
2.5 inch hard disk drive. Refer to Figure 2-2 .
The IP edge EC server supports IPMI (Intelligent Platform Management
Interface) 2.0.
Dimensions • Height 1.7" (43 mm) 1U
• Width 17.2" (437 mm) Fits a standard 19 inch rackmount
• Depth 15" (381 mm)
• Gross Weight 15.4 lbs (7 kg)
Environmental
Specifications
• Operating Temperature: 10° to 35°C (32° to 95°F)
• Storage Temperature: -20° to 60°C (-4° to 140°F)
EC Server - Up to 200 users
EM Server - Up to 1000 users