84
Application
Advanced Mode
This section explains how to configure the Network Camera to responds to particular situations
(event). A typical application is that when a motion is detected, the Network Camera sends
buffered images to an FTP server or e-mail address as notifications.
Event Settings
In the
Event Settings
column, click
Add
to open the
Event Settings
page. On this page, you can
arrange three elements -- Trigger, Schedule, and Action to set an event. A total of 3 event settings can be
configured.
In the illustration on the right, an event can be
triggered by many sources, such as motion detection
or external digital input devices. When an event is
triggered, you can specify what type of action that will
be performed. You can configure the Network Camera
to send snapshots or videos to your email address or
FTP site.
ex. Motion Detection,
Digital Input,
System Reboot
Event Trigger
ex. Snapshot, Video Clips,
System Log, Digital Output
ex. Email, FTP, HTTP Server,
Network Storage
Media
(what to send)
Server
(where to send)
Action
