16
(b) Changing the automatic shutter detection (ratio between peak and average value)
㽲
Move the “
㸢
” to PEAK/AVE by pressing [MENU UP], [MENU DOWN] buttons.
㽳
Select the ratio between peak and average value by presshing [DATA UP], [DATA DOWN] buttons.
(c) Changing the automatic shutter response speed
㽲
Move the “
㸢
” to SPEED by pressing [MENU UP], [MENU DOWN] buttons.
㽳
Select the response speed by presshing [DATA UP], [DATA DOWN] buttons.
1 1 0 2 0
The response speed becomes faster by pressing
[DATA UP]
The response speed becomes slower by pressing
[DATA DOWN]
0 0 : 1 0 0 5 : 0 5 1 0 : 0 0
The peak value increases by pressing
[DATA UP]
The peak value decreases by pressing
[DATA DOWN]
(Peak:Average)
(d) Changing the automatic shutter zone area
The available picture area is shown by the shading correction on the screen that is parted in 64.
㽲
Move the “
㸢
” to AREA by pressing [MENU UP], [MENU DOWN] buttons.
㽳
Select the measurement light area by pressing [DATA UP], [DATA DOWN] buttons.
䌛
DATA UP
䌝
PRESET A
PRESET B
PRESET C
PRESET D
PRESET E
䌛
DATA DOWN
䌝
PRESET A
PRESET B
PRESET D
PRESET C
PRESET E
Note:
These picture areas are not displayed on the screen.
IK-HR1D̲EN.indd 16
IK-HR1D̲EN.indd 16
2008/08/12 15:56:50
2008/08/12 15:56:50
