16
Preparation
(Continued)
*To use the optical digital output, use an
optical cable to connect this jack to an
optical audio input on a device capable of
processing Dolby Digital, DTS bitstream, or
PCM audio.
Sound can output from connected audio system.
If you made the HDMI connection between the player and a TV, this step is unnecessary. Skip to Step 3.
Via HDMI output
You can enjoy the benefi ts of Dolby Digital Plus or Dolby TrueHD by connecting the HDMI OUTPUT jack of your
player to an AV receiver with an HDMI audio input.
This connection requires selection of “Digital Out HDMI” (Step 16, page 22).
Via optical digital audio output
You can listen to down-converted Dolby Digital Plus and Dolby TrueHD as well as Dolby Digital and DTS using a
receiver with Dolby Digital and DTS decoding capabilities and an optical digital input.
This connection requires selection of “Digital Out SPDIF” (Step 16, page 22).
Caution
• When you are connecting (via the HDMI
OUTPUT jack) an AV decoder that does not
have Dolby Digital or DTS decoding capability,
be sure to set “Digital Out HDMI” (
page 22)
to “PCM” or “Downmixed PCM”. Otherwise,
high volume sound may damage your hearing
as well as the speakers.
Note
• You may need to adjust the HDMI audio output
to match the capabilities of your AV amplifi er.
In this case, set “Digital Out HDMI” (
page
22) to “PCM”.
Step 2: Connecting to audio system
HDMI INPUT
HDMI INPUT
HDMI OUTPUT
HDMI compatible
device
AV amplifier
To HDMI OUTPUT
HDMI cable
(supplied)
HDMI cable
(not supplied)
AV amplifier
To DIGITAL AUDIO OUTPUT
BITSTREAM/PCM OPTICAL
Optical digital cable (not supplied)
DIGITAL INPUT
OPTICAL
Via 5.1ch analog audio output
This connection requires selection of “Speaker Setting” (Step 16,
page 23).
AV amplifier
To ANALOG AUDIO
OUTPUT 5.1CH
SURROUND
Audio cable
(not supplied)
CENTER
SUBWOOFER
L
R
L
R
SURROUND
FRONT
HD-EP35KE̲Eng.indd 16
HD-EP35KE̲Eng.indd 16
07.8.30 7:34:41 PM
07.8.30 7:34:41 PM
