Toshiba GRZ100-211B, Инструкция по эксплуатации, Страница: 230 / 463


229

6 F 2 S 0 8 3 4
／２ Ｓｗｉｔｃｈ １／ ２９
Ａ．Ｍ．Ｆ． ０＝Ｏｆｆ １＝Ｏｎ １ ＿
Ｚ１Ｓ－１ＰＨ ０＝Ｏｆｆ １＝Ｏｎ ０
ＺＢ－ＣＴＲＬ ０＝Ｎｏｒｍ １＝ＯＦＳＴ ２＝Ｎｏｎ－ＯＦＳＴ ０
ＸＡＮＧＬＥ ０＝Ｏｆｆ １＝Ｏｎ ０
ＤＯＣＮ－Ｃ ０＝Ｏｆｆ １＝Ｏｎ ０
Ｌ．ｔｅｓｔ ０＝Ｏｆｆ １＝Ｏｎ ０
Ｔ．ｔｅｓｔ ０＝Ｏｆｆ １＝Ｏｎ ０
Ｄ．ｔｅｓｔ ０＝Ｏｆｆ １＝Ｏｎ ０
ＩＥＣＴＳＴ ０＝Ｏｆｆ １＝Ｏｎ ０
ＴＨＭＲＳＴ ０＝Ｏｆｆ １＝Ｏｎ ０
ＵＶＴＥＳＴ ０＝Ｏｆｆ １＝Ｏｎ ０
ＣＯＭ１ ０＝Ｏｆｆ １＝Ｏｎ ０
ＣＯＭ２ ０＝Ｏｆｆ １＝Ｏｎ ０
ＣＯＭ３ ０＝Ｏｆｆ １＝Ｏｎ ０
ＣＯＭ４ ０＝Ｏｆｆ １＝Ｏｎ ０
ＣＯＭ５ ０＝Ｏｆｆ １＝Ｏｎ ０
ＣＯＭ６ ０＝Ｏｆｆ １＝Ｏｎ ０
ＣＯＭ７ ０＝Ｏｆｆ １＝Ｏｎ ０
ＣＯＭ８ ０＝Ｏｆｆ １＝Ｏｎ ０
ＣＯＭ９ ０＝Ｏｆｆ １＝Ｏｎ ０
ＣＯＭ１０ ０＝Ｏｆｆ １＝Ｏｎ ０
ＣＯＭ１１ ０＝Ｏｆｆ １＝Ｏｎ ０
ＣＯＭ１２ ０＝Ｏｆｆ １＝Ｏｎ ０
ＣＯＭ１３ ０＝Ｏｆｆ １＝Ｏｎ ０
ＣＯＭ１４ ０＝Ｏｆｆ １＝Ｏｎ ０
ＳＣＯＭ１ ０＝Ｏｆｆ １＝Ｏｎ ０
ＳＣＯＭ２ ０＝Ｏｆｆ １＝Ｏｎ ０
ＳＣＯＭ３ ０＝Ｏｆｆ １＝Ｏｎ ０
ＳＣＯＭ４ ０＝Ｏｆｆ １＝Ｏｎ ０
Testing the offset characteristic of Z1
•
Enter 0 for [A.M.F] to disable the automatic monitoring function and enter 1 for [ZB-CTRL]
to modify the offset characteristic forcibly.
•
Press the END key to return to the "Test" screen.
Testing the gradient characteristic of Zone 1 and Zone 1X
•
Enter 0 for [A.M.F] to disable the automatic monitoring function and enter 1 for [XANGLE]
to modify the gradient characteristic forcibly.
•
Press the END key to return to the "Test" screen.
Testing the characteristic of DOCN
•
Enter 0 for A.M.F to disable the automatic monitoring function and enter 1 for [DOCN-C] to
enable the DOCN element to operate.
•
Press the END key to return to the "Test" screen.
L.TEST, T.TEST and D.TEST
When [L.TEST] is set to “ON”, the data received from the remote terminal(s) are not used. Thus in
the three-terminal application, the out-of-service terminal can carry out a local relay testing
without disturbing the in-service terminals.
[T.TEST] and [D.TEST] are valid when the integral digital communication applied.
When the [T.TEST] is set to “ON”, the local data is looped into the receiving circuit interrupting
the data from the remote terminal as well as transmitted to the remote terminal.
www
. ElectricalPartManuals
. com