14
8) Take out the top left hinge from accessory bag.
Put refrigerating chamber door on middle hinge, install top left hinge. Connect signal line
terminal (4) with signal line terminal (1) ,connect signal line terminal (2) with signal line
terminal(3); Install top hinge cover. (The following must be confirmed before installing the top
hinge cover. The screws that hold the hinge should be tightly pressed against the hinge surface to
ensure that the screw is not deflected. After the hinge is installed, make sure there is no shaking)
For the assembly of handle, please refer to chapter 2.2.
decorative cover
hinge cover
(1)
(4)
(2) (3)
(The picture above is only for reference.The actual configuration will depend on the physical
product or statement by the distributor)
2.5 Changing the Light
Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer,
2.6 Starting
•
Before putting any fresh or frozen foods, the refrigerator shall
have run for 2-3 hours, or for above 4 hours in summer when
the ambient temperature is high.
•
Spare enough space for convenient opening of the doors and
drawers or statement by the distributor.
700mm
600mm
1215m
m
1080mm
125
