Toshiba GR 200 Series, Инструкция по эксплуатации

Страница: 672 / 1563

6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)
- 651 -
*4
Note: Criteria “unmatched conditions” are decided when “Test-bit status” in a
command is not identical to “IED test status”.
*5
Note: The user should program the PLC logic “Control hierarchy condition”. The
user should connect its condition with the select condition logic using the
connection point “OPTR01_CTRL_RIGHT”. For more information, see chapter
Control and monitoring application: Control hierarchy. “OPTR01_CTRL_RIGHT”
is provided in Table 4.4-3.
*6
Note: To know the input point of the OPTIM function, see Table 4.4-3.
Table 4.4-2 Input signal for condition logic
Signal Number Signal Name Description M/O
522001 000A011001 CBK_STATE Command Blocking status ( Off / Blocked) N/A
5A0001 0008001F41 DCB RCV OR Double Command Blocking(DCB) is in progress. N/A
5A0001 0008001F40 Traveling OR Travelling events are detected. N/A
5A0101 3100001F43 SERI_ERR Serious Error detected N/A
523001 000D001F40 ASEQ_MULTI_SEL Automatic sequence control is in progress. N/A
Table 4.4-3 PLC connection point (Input point on select condition logic)
Signal Number Signal Name Description M/O
529001 820C01ED50 OPTR01_CTRL_RIGHT OPTIM control hierarchy M
Table 4.4-4 Setting of the OPTIM function
Setting Name Description Default Setting item or value
OPTR01_EN Enabling the OPTIM function On Off / On