16
Table Destination and Folder
Destination Folder name
Scenario file name
Japan OTTOMAN_SAMPLE_JP
OTTOMAN_SAMPLE_JP.ini
U.S.A. OTTOMAN_SAMPLE_US
OTTOMAN_SAMPLE_US.ini
The menu display is also the same as in step 4). Check two points of (A) and (B) on the menu in step 4).
These are different depending on the destination ((A) is same.) The display for every destination is shown
below.
Table Differences of display by destination (Differences are underlined.)
Destination (A)
(B)
Japan
version 0.9.9.10
TRANS SAMPLE COMTENTS(
JP
) Ver.6423A
U.S.A.
version 0.9.9.10
TRANS SAMPLE COMTENTS (
US
) Ver.6423A
14) Wait for a while. Then, “OK” appears on the PC.
15) Remove the USB cable. At this moment, be careful not to touch the POWER button of gigabeat S. By
removing USB cable, “OK” on the PC disappears.
16) Hold down the Power key to suspend (Power OFF). Plug out the AC adapter.
3.5. When replacing the LCD and LCD backlight unit
3.5.1. Incorporating them into the LCD frame
Peel off the protective film from the LCD and LCD backlight, then incorporate them into the LCD frame.
Guard against fingerprints and dust.
Содержание Gigabeat S MES30V
Страница 9: ...5 2 Block diagram 2 1 Logic circuit block diagram ...
Страница 10: ...6 2 2 Power circuit block diagram ...
Страница 43: ......
