Toshiba GF630, Инструкция по эксплуатации

Страница: 29 / 56

－ ２８ －
６Ｆ８Ａ０８８３
CAUTION
„ Install a switch and fuse
to isolate the
GF630/LF600F, GF630/LF610F and GF632
from mains power.
„ Turn off mains power
before conducting wiring
work.
DO
Power supply from mains power can
cause
electric shock
or
circuit
break-down
.
DO
Wiring while power is applied can cause
electric shock
.
„ Do not work on piping and wiring with wet
hands. „ Ground the LF600F and LF610F independently
from power equipment. (100 ohm or less ground
resistance)
DON’T
Wet hands may result in
electric
shock
DO
Operating this product without grounding
can cause
electric shock
or
malfunction
.
„
Do not conduct wiring work
with bare hands
.
„
For the power supply wiring and grounding wiring,
use crimping terminals with insulated sleeve.
DON’T
Remaining electric charge
even if
power is turned off can still cause
electric shock.
DO
There is a
risk of electric shock
due to
drop-off or loosing, and a
risk of fire
and
equipment trouble
due to heat generation.
Do not modify or disassemble the
GF630/LF600F, GF630/LF610F and GF632
unnecessarily.
DON’T
Modifying or disassembling this
product can cause
electric shock,
malfunction of or damage to this
product.
The label shown left is placed near the
power supply terminal on the converter.
Be alert to
electric shock
.
Flowmeter accuracy may be affected
by the way wiring is executed. Proceed with correct wiring taking
the precautions in following pages
.