Toshiba GA-1330, Руководство по обслуживанию

Страница: 9 / 38

GA-1330 SPECIFICATIONS 1 - 5
(3) Send file (message and filename)
• Information contained in filename
Example:
e-STUDIO203SD_20000620_155114_0057_06a3f3393948.pdf
• Mail subject
Can be freely set.
Default:
Scanned image. device name: e-STUDIOXXX (MFP product
name)
Example: Scanned image. device name: e-STUDIO203SD
• Mail message
The following messages are added to the image send mail.
Example:
Device name : e-STUDIO203SD
Model name : e-STUDIO203SD
Location : D2) Planning dept.
File type : PDF MMR (G4)
Resolution : 200 dpi x 200 dpi
(4) Recipient registration
• Up to 200 destinations can be registered on the network expan-
sion kit to which the scan can be sent from the network scanner.
• The mail address registered for each destination can be selected
from the mail address which is searched using LDAP.
• The information for each recipient includes the recipient name, IP
address or mail address, scanning size, format type, and scan
parameter.
• Either of LDAP-selected or directly-entered mail address scan set-
ting is available. If the destination is a mail address entered
through the main system or selected by LDAP, this scan setting is
used.
• The destination name is displayed on the LCD.
(5) Scanning size
• Scanning size is the size set up in main unit (Copier).
(Apply to the main scan, a subscan, RADF, and OC)
(6) Scanner limitations
• The scanning function is allocated to the network expansion kit.
The b Button Manager settings are disabled.
• When the network expansion kit is connected, the scanner func-
tion through TWAIN (pull scan) and push scan which used button
manager on pc are not available.
C. Functions by interface
When the network expansion kit is connected, the following func-
tions are available by system interface.
(*1): PS requires soft keys of the GA-1180.
D. Network setup
Network setups should be performed by the system administrator.
Use a setup tool such as TCP/IP, Netware, Ether Talk or Web inter-
face.
E. Software setup
The network expansion kit can be installed by setting up NIC, install-
ing a printer driver with the total installer, and installing Desktop Doc-
ument Manager.
(1) Installing driver
The network expansion kit printer is connected only through the net-
work. The port setup required for installing a printer driver is the net-
work only. The following items should be set up.
• TCP/IP peer-to-peer port
1) Search for the network expansion kit on the network and select
the network expansion kit you want or enter the IP address of
the applicable network expansion kit to create a TCP/IP port.
2) Install the driver to the created port.
• Windows printer shared port
When the setup of the above client PC is completed and the
printer is set to "Windows shared printer," other client PCs can
select this printer shared port and then proceed to installation of
the driver.
F. Hardware setup
1) Connection to the system unit
Connect to the USB2.0 port
2) Power supply
Supplied by the main unit.
Sender name : Use MFP product name.
Date & Time : Date and time at which file is sent
Session page
counter : Image send counter
Unique identifier : Automatically created based on the information
of the date and time and image send counter.
Device name : Freely set
Model : MFP product name
Location : Freely set
File type : File type of send image
Resolution : Resolution of send image
System I/F
(main unit)
GA-1330 I/F
Function
SPLC GDI PCL5e/6
PS
(*1)
Net
Scan
USB2.0 RJ45 (LAN) No No Yes Yes Yes
USB2.0
➝
Yes No No No No