Toshiba ER-GD400C, Инструкция по эксплуатации, Страница: 62 / 64

62
Effect Reason (Measure)
There is no display after the electric plug is
connected to the power supply.
There are some noises during cooking
Continuous noise during heater operation
Continuous noise (ji....) during microwave
cooking.
On and off fan sound during and post
cooking cooling.
No display occurs when key is pressed.
If the door is opened, the control panel
displays [0].
Hissing sound during steam cooking.
Condensed water drips into the oven cavity.
Steam leaks from oven door.
Wate collects inside the oven.
PipPip Buzzer sound occurs one minute after
cooking is over.
Steam leaks from the gap between the door
and the oven.
There is some smoke and smell
during the operation.
Steam does not come out.
・ If the plug is connected to the power supply with the door closed, the power supply
will be cut off. Open the door once to ON the power supply.
・ Sound due to fan operation that takes place during oven Does not denote malfunction.
・ After cooking, the oven fan operates to cool the oven.
When the fan works,the display [COOLING]
Spark occurs during cooking.
・
Did you use the square tray? Do not use square tray inside microwave.
・
Did you use metal container or grill for microwave recipes?
・
Metal skewers, containers or metal objects etc may cause spark.
・
Is the oven dirty? Radio waves tend to converge on the dirt and cause spark.
・ Water droplets may condense depending on the menu and little amount of steam
may leak. It does not have a damaging effect on the oven.
Wipe the moisture with a dry cloth.
・ Depending on the volume of steam generated and the room temperature, some
steam may leak but it does not have any effect on the cooking process.
There is no radio wave leakage when microwave is used.
During oven cooking, the LCD display is not
visible.
・
The LCD display turns dark at high temperature and may not be visible. This is due to
the property of LCD and does not signify malfunction. When the oven temperature
decreases, the LCD display is visible.
The temperature in the oven is not the same
as set temperature.
・ The oven temperature setting is standardized for empty oven. If the temperature is
set after adding the food or oven accessories, the setting may change. When
cooking, refer to recipe guide for recommended temperature settings.
・ Noise occurs due to steam conversion. Does not denote malfunction
・ Occurs due to heat contraction against oven walls. Does not denote malfunction
・
Noise is due to microwavecooking operation. Does not denote malfunction
・ If the door is opened for more mode than 5 min, the energy saving may be in
operation. (Open the door, place the food inside and start.)
・ When the door is opened, the power supply is connected.
・ If the food is not taken out after cooking is over, the buzzer will start ringing. It
does not denote malfunction.
・ Check if the water tank is fitted properly and add water to it.
・ When the oven gets heated, the steam may not be visible.
・ Noise occurs when water gets converted to steam upon heating by steam heater.
The noise may be loud when used initially.
・
When using the oven for the first time, smoke or smell may occur due to oil or
grease burning off. It does not indicate malfunction.
・ Did you warming the empty oven · deodorize?
・ Is the oven or the door dirty?
Oven door becomes foggy ・ During or after cooking, the glass door turns foggy or cloudy. It does not denote
malfunction. The effect subsides after 2 hours.When the oven is Warming the
empty oven · deodorize, the effect subsides in 30 min. (Refer to page 24).