manualshive.com logo in svg

Toshiba e-Studio477s, Руководство для продвинутых пользователей, Страница: 166 / 264

Поделиться
Скачать
Toshiba e-Studio477s Скачать руководство пользователя страница 166

SETTING ITEMS (ADMIN)

- 166 -

2

1

3

4

5

6

7

Setting the calibration display level

You can set whether this equipment will use the calibration 
setting set by a user or the administrator.
The relevant buttons ([CALIBRATION]) will appear under the 
ADMIN menu only or under both the USER and ADMIN menus 
according to this setting.

Setting the calibration

You can automatically calibrate the gradation when the 
shading is not reproduced accurately in the images scanned by 
this machine.

Note

• Whether to allow calibration by not only administrators but 

also users, is set by DISPLAY LEVEL.

P.166 "Setting the calibration display level"

• Place LT or A4 paper (recommended paper) in the drawer

 

before starting the calibration. If any other paper is used, 
calibration may not be performed properly.

• If the glass is dirty or any foreign objects are stuck to it, 

calibration may not be performed properly. Keep the glass 
clean.

• Do not raise the Reversing Automatic Document Feeder, or 

open the front cover while the calibration is in progress. If 
this does happen, calibration cannot be finished properly.

• Interrupt copying is not available during the calibration.

Memo

• For instructions on how to display the CALIBRATION 

screen, see the following page:

P.139 "Accessing the User Menu"

1

Press [COPY].

2

Select the paper type and press [OK].

Note

• Depending on the machine settings, the screen to 

select the paper type may not be displayed. In this 
case, proceed to the next step.

3

Select the calibration settings.

4

Place the printed chart face down on the 
glass, so that the two black rectangular 
marks are placed on the left side.

5

Press the [START] button on the control 
panel.

The calibration begins. Do not operate the equipment 
until the message “Scanning and calibrating” disappears.

Note

• If the chart is not properly placed, the message “Set 

chart correctly” is displayed on the touch panel. In this 
case, return to step 3 and realign the chart.

Setting the status message

You can have a status message displayed at the bottom of the 
touch panel, notifying the occurrence of specified events, such 
as paper empty and toner low.
Press [ON] or [OFF] for each status message and press [OK].

Setting the auto clear function

You can set how long the machine waits before clearing the 
previous operation left uncompleted on the control panel.
Press the desired period of time (in seconds). If you want to 
disable the Auto Clear function, press [NO LIMIT].

Item name

Description

CALIBRATION

•

USER

 — Press this button to display 

[CALIBRATION] in the ADMIN menu 
as well as the USER menu.

•

ADMIN

 — Press this button to display 

[CALIBRATION] in the ADMIN menu.

Item name

Description

DEFAULT

Press this button to restore the 
default calibration setting and return 
to the previous screen.

CALIBRATION

Press this button to calibrate using 
the printed chart. In this case, 
proceed to the next step.

Item name

Description

SUPPLIES 
NEAR LIFE 
MESSAGE

Enabling this option displays a message 
at the lower left of the screen when 
supplies such as toner, image drum, fuser 
unit and belt unit nears the end of their 
lifespan.

PAPER EMPTY 
MESSAGE

Enabling this option displays a message 
at the lower left of the screen when there 
is no paper in a drawer.

Содержание e-Studio477s









































































































































































































































































Отзывы:

Нет отзывов