Toshiba e-Studio332s, Руководство оператора

Страница: 85 / 183

Basic Procedure for Faxing
- 85 -
Faxing (for
e-
STUDIO403S only)
3
Using Transmission and Reception
History
You can select a destination from the 50 most
recent transmissions or receptions.
1
Press the to select [ Tx History ] or
[ Rx History ] and then press .
2
Press the to select an entry and then
press .
The check box is selected. You can select multiple
entries.
3
When you have selected all the
destinations, press the .
4
Check that [ Complete ] is selected and
then press .
Using One-Touch Key Pad
The one-touch key pad can hold fax numbers
registered in Speed Dial List.
The speed dials no.1 to 16 are automatically
registered to the one-touch key pad.
1
Press the desired one-touch key on the
start screen.
Press the < SHIFT > key to select the speed dials
no.9 to 16 assigned to the one-touch key pad.
Memo
z
You can use the one-touch key pad also on the screen that
is displayed after pressing the <
FAX/HOOK > key. In this
case, the fax standby screen appears after pressing a one-
touch key so that you can configure other advanced
settings for fax functions.
Deleting Specified Destinations
1
Select the specified destination on the
fax start screen by pressing and then
press .
2
Press the to select a destination you
want to delete and then press .
The check box is selected. You can select multiple
entries.
3
When you have selected all the
destinations to be deleted, press .
4
Check that [ Delete The Address ] is
selected and then press .
- If all recipients have been deleted, you will be
taken back automatically to the start screen.
- If not all recipients have been deleted, press to
go back to the start screen.
OK
OK
OK
OK
OK
OK